Modelo afectado

Esta información es para los siguientes modelos:

  • HXR-IFR5
  • NEX-FS700E
  • NEX-FS700EK

1.) RAW shooting mode
  – Output RAW data to SDI interface.
  – Resolutions and framerate: 4K (4096×2160) and 2K (2048×1080) at 50p, 25p, 23.98p, 59.94p and 29.97p
  – Super Slow Motion: 4K at 120 and 100 fps (approx. 4 sec) and 2K at 240, 200, 120 and 100 fps (continuous, depending on AXSM memory capacity)
2.) Addition of S-Log2 (1300% Dynamic Range) and 709 (800%) gamma curves.
3.) Rec trigger output on SDI and HDMI, for compatible control with external recorder.
4.) Secure acces mode of Professional PX series Memory Stick.
5.) Power zoom lens control (available also on V2.00).
In order to process NEX-FS700 RAW data recorded by AXS-R5, update of the following software is needed, depending on user’s equipment:
  – AXS-R5: V1.2
  - RAW Viewer: V1.1
  - RAW Plug-in for Avid: V1.2
  – RAW Plug-in for Adobe: V1.2
This upgrade requires a hardware modifcation which can only be performed by Sony engineer.
Please contact Helpdesk for details. 

1) Distortion correction of E-mount lenses supported (SELP18105G, SELP1650)
2) Iris ring operation supported (SELP28135G)
3) Direction change on zoom ring rotation (SELP28135G)
4) Operation stability improvement
This software is for upgrading from V2.00 only
 •  If you have an NEX-FS700R or NEX-FS700RH, you will need to install V3.10.
 •  If you have an NEX-FS700E or NEX-FS700EK which has been modified to use V3.xx software, you will need to install V3.10.