Saltar al contenido

Instalación

Firmware Update 1.20 for Pioneer DVR-107DVA (CD-RW/DVD±RW Drive)

This program will update Firmware on the following VAIO Notebook models running Windows XP:

PCV-RZ504

PCV-RS602

PCV-RS604

This firmware fixes following issue :

- Added support for readability of a DVD+R Dual Layer Single session Finalized disc.

IMPORTANT NOTES: PLEASE READ CAREFULLY

Please make sure that there is no disk in the device before you execute this firmware.

Do not shutdown the unit while the Firmware update procedure is in progress.

Do not stop the Firmware update procedure while in progress.

Not following any of the above, could severely damage your system !!

1. How to verify if your unit has a Pioneer DVR-107DVA ?

1. Click on the Start button and then right click on My Computer.

2. Click on Properties.

3. Select the Hardware tab and than click on Device Manager.

4. Double click on DVD/CD-ROM drives.

5. Verify now that you can see "Pioneer DVD-RW DVR-107D".

6. If you have the corresponding drive, than you can proceed with the Firmware upgrade.

2. Download Instructions

1. Download the fileFirmware Update Pioneer DVR-107DVA (1.20).exe, and save it to a download directory (ex. C:\Download\).
2. Go the download directory, and double-clickFirmware Update Pioneer DVR-107DVA (1.20).exe.
3. A popup will appear : This will extract all files to C:\Download\Firmware Pioneer DVR-107DVA (1.20)\. Press OK to proceed.
4. A popup will appear : All files have been extracted successfully !
5. Press OK to finish.

3. Installation Instructions

1. Open the Windows Explorer.

2. Browse to folder : C:\Download\Firmware Pioneer DVR-107VA (1.20)\.

3. Double click file : DVR107DVA_FW120_EU.EXE.

4. Dialog box will pop up. Click the Install button to proceed.

5. Dialog box will pop up. 1 target device(s) is found. Do you want to update all drives ?

6. Click the Yes button. This will start the Firmware Update process. Please wait till completion.

7. Dialog box will pop up : Please reboot your PC now... (Yes or No).

8. Click the Yes button. This will restart your computer.

4. How to identify the new version?

1. Open the Windows Explorer.

2. Browse to folder : C:\Download\Firmware Pioneer DVR-107DVA (1.20)\.

3. Double click file : DVR107DVA_FW120_EU.EXE.

4. Dialog box will pop up. Click the Install button to proceed.

5. Dialog box will pop up. 1 target device(s) is found. Do you want to update all drives ?

6. Click the Yes button. The program will check the current revision of the firmware. If current revision of the firmware is 1.20 you"ll get the following dialog box.

7. Dialog box will pop up. No drive has been accomplished to update.

8. Click the OK button.

9. This means drive has the latest firmware currently available.

IMPORTANT NOTES: PLEASE READ CAREFULLY.

Sony Corporation will not be responsible for any problems caused by customer"s improper operation when customers did not follow the instructions below.

1.Make sure to follow the instruction correctly in this program.
2.This program is only for the above stated Sony VAIO notebooks.
3.The property rights protect this program. Customers are not allowed to deliver a copy, or use in a way Sony does not determine.
4.Sony Corporation is not responsible for any loss or damage caused directly or indirectly from using this program.

Sony, VAIO and the VAIO logo are registered trademarks of Sony Corporation.
Microsoft, MS, MS-DOS, Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are trademarks of their respective owners.

Información de archivo

Nombre de archivo

  • FW_DVR-107DVA_1_20.exe

Arquitectura de archivos

  • 32 bit

Tamaño de archivo

  • 2 Mb

Fecha de lanzamiento

  • 71-82-2004